Lockable Gas Springs for Seating, Recliners and Height-Adjustable Tables
Lockable Gas Springs For Seating And Tables
Seating and table mechanisms need to stop at any position the user chooses, not only at fully open. A lockable gas spring does this: the user presses a lever, button or cable release, moves the backrest, footrest or table top, and lets go to lock it in place. LX Gas Spring makes lockable gas springs for OEM seating, recliner, treatment chair and adjustable table manufacturers, with force, stroke, locking type and release control matched to each mechanism.
Where Lockable Gas Springs Are Used
Typical uses are recliner backrests and footrests, sofa and lounge seating mechanisms, treatment and examination chairs, ergonomic and height-adjustable tables, learning and drafting tables with tilting tops, and monitor or equipment stands. In each case the gas spring counterbalances part of the load, so the user only adds a small force to adjust it, and the lock holds the chosen position.
Rigid Or Elastic Locking
In a rigid lockable gas spring, oil fills the locking chamber, so the locked position stays firm under load; this is common for height-adjustable tables, beds and equipment. In an elastic lockable gas spring, gas remains in the locking chamber, so the locked position gives slightly; this feels more comfortable in chairs and recliners. State the load direction and how much movement is acceptable when locked.
Release Controls
The release pin can be pressed directly by a lever or push button at the rod end, by a threaded release head that screws into your own actuator, or remotely by a Bowden cable with a lever or paddle handle. A dual cable system releases two lockable gas springs with one handle, so wide backrests and table tops move evenly. Route cables with gentle bends and check the release effort on a sample.
Sizes And What To Send For A Quote
The standard KQL lockable range covers about 200-900 mm extended length, 40-350 mm stroke and 60-1,100 N, with 22 mm or 27 mm tubes and 10 mm rods; other sizes, end fittings and release heads are made to order. For a quote, send the seat, backrest or table-top load, stroke, extended and compressed length, locking type, release type and handle position, cable length, end fittings and annual quantity, with a drawing or photo of the mechanism.
Seating, Recliner and Table Mechanisms
Technical Specifications
| Specification | LX lockable gas springs |
|---|---|
| Standard lockable range (KQL) | About 200-900 mm extended length, 40-350 mm stroke |
| Force (KQL) | About 60-1,100 N; other forces made to order |
| Tube / rod | 22 mm or 27 mm tube, 10 mm rod |
| Locking | Rigid (oil) or elastic (gas) |
| Release | Lever, push button, threaded release head, Bowden cable, dual cable for two springs |
| Operating temperature | -30 C to +80 C |
| Quality | ISO 9001; TUV fatigue test of 180,000 cycles; 3-year warranty |
Frequently Asked Questions
Can lockable gas springs be used in recliners and chairs?
Yes. Lockable gas springs hold recliner backrests, footrests and treatment chair sections at any position. Elastic locking, with a slight give when locked, is common in seating because it feels more comfortable.
Which locking type is best for a height-adjustable table?
Rigid locking is usually chosen for tables, because oil in the locking chamber keeps the top firm when someone leans on it. The force is set so the spring counterbalances most of the top weight.
Can one handle release two lockable gas springs?
Yes. A dual cable system releases two lockable gas springs with one lever or paddle handle, so wide backrests and table tops move evenly.
What information do you need to size a lockable gas spring for seating or a table?
Send the moving load, stroke, extended and compressed length, locking type, release type and handle position, cable length, end fittings and quantity, plus a drawing or photo of the mechanism. A sample should then be tested in the real chair or table.
Do you supply OEM seating and furniture manufacturers?
Yes. LX Gas Spring supplies OEM, ODM and private label lockable gas springs with custom force, stroke, fittings, release heads, finish and packaging. All LX gas springs carry a 3-year warranty.