Cabinet Gas Springs for Lift-Up Doors and Storage Panels

Compact Motion Support For Furniture And Equipment Cabinets

Cabinet gas springs provide smooth lift assistance and stable support for lift-up doors, storage lids, kitchen hardware, display fixtures, and industrial cabinet panels. They help improve access while reducing the effort needed to open and hold a panel.

Choose The Right Size For Cabinet Geometry

Cabinet gas spring selection depends on panel weight, hinge position, opening angle, desired feel, available mounting space, stroke, and end fittings. OEM projects can use compact lift gas springs, dampers, or custom mounting brackets depending on the cabinet design.

OEM Cabinet Hardware Selection Details

For cabinet gas spring sourcing, share door height, panel weight, hinge offset, screw holding strength, internal clearance, finish color, packaging needs, and annual quantity. Compact size, quiet operation, and bracket geometry usually matter as much as the nominal Newton force.

Cabinet Gas Spring Applications

Lift-up wall cabinet door held open by a gas spring
Lift-up wall cabinet door held open by a gas spring.
Gas spring installed inside a wall cabinet
Gas spring installed inside a wall cabinet.
Cabinet flap door supported by a gas spring
Cabinet flap door supported by a gas spring.
Gas springs on a lift-up storage cabinet door
Gas springs on a lift-up storage cabinet door.

Cabinet Gas Spring Selection Guide

Cabinet gas springs focus on compact size, quiet movement, light opening force, and clean installation inside furniture or equipment housings. The best result comes from matching the gas spring to hinge geometry rather than choosing force alone.

Best-Fit Uses

  • Kitchen lift-up cabinet doors and overhead storage flaps.
  • Office cabinets, display cases, and retail furniture panels.
  • Equipment cabinets where the cover must stay open during service.

Recommended Product Types

  • Miniature lift gas springs for light cabinet panels.
  • Nylon or plastic end fittings for quieter furniture hardware.
  • Dampers when controlled closing is more important than lift force.

What To Send For RFQ

  • Door weight, door height, and hinge location.
  • Desired open angle and available internal mounting space.
  • Whether the panel should self-open, hold open, or soft-close.
  • Preferred tube color, fitting style, and annual quantity.

Technical Specifications

SpecificationReference Options - Confirm by Project
Force Range (F1)30N - 500N (Low force precision)
Rod / Tube DiametersMiniature 6/12mm or Standard 6/15mm
Damping ProfileHeavy hydraulic end-damping for soft-close
Finish OptionsSilver, Black, or Custom White Painted
End ConnectorsNylon ball sockets for acoustic isolation

Frequently Asked Questions

What force (N) do I need for standard kitchen cabinets?

Required force cannot be selected from door material alone. Measure panel weight, center of gravity, hinge position, opening angle, and mounting points, then use the gas spring force calculator as a starting estimate.

Why won't my cabinet door stay closed?

If the door pops open slightly, the gas spring was likely mounted incorrectly. The mounting point must pass over the hinge center-line to create closing pressure (over-center geometry).

Can I replace a 100N strut with a 200N strut?

Usually not. A much stronger strut can overload the hinges and the screws in particle board and make the door hard to close. Recalculate the force from the door weight and geometry instead.

Are cabinet gas springs the same as toolbox gas springs?

No. Cabinet gas springs are smaller, typically 6/12 mm or 6/15 mm, with lower forces of about 30-500 N and soft end damping. Toolbox gas springs are larger units for heavy steel lids.

Do you supply bulk orders for furniture manufacturers?

Yes. LX Gas Spring supplies cabinet and furniture manufacturers in volume, with custom force, length, finish color, and packaging, and samples for fit testing before batch production.

What should I send for an OEM cabinet gas spring quote?

Send panel weight, door height, hinge position, open angle, internal mounting clearance, fitting preference, finish color, annual quantity, and a photo or drawing of the cabinet structure.

How long do cabinet gas springs last?

Service life depends on cycles, load, mounting, temperature, and environment. LX gas springs have passed a TÜV fatigue test of 180,000 cycles, and all LX gas springs are covered by a 3-year warranty. Cycle and corrosion tests can be agreed on samples for OEM projects.