Custom Lift Gas Springs and Gas Struts for Lift Equipment
Lift Support For Covers, Doors, Hatches, And Panels
Lift gas springs are used to assist opening and support hinged parts such as toolboxes, machinery covers, vehicle panels, cabinets, storage compartments, and access hatches. The suitable configuration depends on the moving load and installation geometry rather than the application name alone.
Force And Geometry Review
A starting force estimate uses moving weight, center of gravity, hinge position, opening angle, mounting distances, and the number of gas springs. Final force and bracket positions should be checked with the actual assembly because small mounting changes can alter opening effort and end-of-travel behavior.
Stroke, Length, And Fitting Selection
Extended length, compressed length, usable stroke, clearance, and end fitting articulation should be reviewed together. Ball joints, clevises, eyelets, blade ends, nylon ends, and brackets are selected according to the load path, available space, side-load risk, and operating environment.
Sample And Drawing Approval
Before repeat production, the sample should be checked in the final equipment for opening effort, hold-open position, closed clearance, fitting movement, bracket load, and installation access. The approved force, dimensions, fittings, finish, and marking can then be recorded on the production drawing.
Information To Include In An RFQ
Send the application, moving weight, center of gravity estimate, open angle, open and closed mounting distances, stroke, extended and compressed length, number of gas springs, fitting preference, environment, quantity, and drawings or marked photos. These inputs support an initial review; final suitability remains subject to sample validation.
Gas Springs For Lift Equipment And Machinery Covers
Lift gas springs are used as lift assists on equipment covers, service hatches, machine guards, inspection doors and heavy access panels, where a person must open a heavy part safely and it must stay open while they work. The 22/10 mm and 28/14 mm sizes cover heavier panels up to about 2,500 N; send the panel weight, hinge position and mounting points so the force and stroke can be checked for your equipment. Where a lift table, platform or cover must stop and hold at any height or angle, use lockable gas springs, which lock at any point of the stroke and are released by a lever, push-button or cable. For very heavy panels, see heavy-duty gas springs.
What A Lift Gas Spring Does
A lift gas spring (compression gas spring or gas strut) is a sealed cylinder filled with pressurised nitrogen and a small amount of oil. The gas pressure pushes the piston rod out, so the spring lifts, counterbalances, and holds open lids, hatches, doors, covers, and panels. Extension force is set by the gas charge and rod diameter, and rises slightly as the spring is compressed.
Force, Stroke, And Size Range
LX lift gas springs are made from about 10 N to 2,500 N, with strokes from 20 mm to 1,000 mm. Typical sizes are 15 mm tube / 6 mm rod for light lids (10-50 N), 18 mm / 8 mm for medium covers (100-500 N), 22 mm / 10 mm for heavier hatches, and 28 mm / 14 mm for heavy-duty panels (1,000-2,500 N). Extended length follows the stroke and end fittings, and every dimension can be made to the drawing.
End Fittings And Mounting Brackets
Lift gas springs are supplied with metal or plastic ball sockets, eyelets, clevis forks, flat blade ends, threaded studs, and angled or flat mounting brackets. Ball joints allow articulation and reduce side load; eyelets and clevis ends suit fixed pivots and higher bracket loads. Matching brackets and ball studs can be supplied with the springs.
Construction, Finish, And Damping
Standard LX lift gas springs use a seamless or Q235 steel tube with black painted finish, a QPQ-treated or chrome-plated piston rod, and a double-seal system, for a standard operating range of -30 °C to +80 °C. An end-of-stroke hydraulic damping zone can be added so the lid slows down before fully open. SS316 stainless steel versions are available for marine and washdown use.
Where Lift Gas Springs Are Used
Common OEM applications include vehicle hoods, tailgates and rear doors, truck and workshop toolboxes, kitchen cabinets and storage beds, machinery guards and access covers, medical beds and equipment, marine hatches, RV compartments, and container and enclosure doors.
Quality, Capacity, And Lead Time
LX gas springs have passed a TÜV fatigue test of 180,000 cycles, and all LX gas springs are covered by a 3-year warranty. Changzhou Longxiang Gas Spring produces more than 3 million gas springs a year, exports to more than 70 countries, and typically ships production orders within 15 working days after sample approval.
Lift Gas Springs and End Fittings
Frequently Asked Questions
Do you make gas springs for lifting equipment manufacturers?
Yes. LX Gas Spring supplies OEM lift gas springs for equipment covers, hatches, guards and access panels, from about 10 N to 2,500 N and 20 mm to 1,000 mm stroke, with custom end fittings, finish and packaging.
What is a lift gas spring?
A lift gas spring, also called a compression gas spring or gas strut, is a nitrogen-charged cylinder whose rod pushes outward to lift and hold lids, hatches, doors, and panels open. It is the most common type of gas spring.
How do I choose the right force for a lift gas spring?
Weigh the lid at the handle end, measure the hinge position and mounting points, and calculate the force per spring with a gas spring force calculator. Add a margin for cold weather and use two springs on wide lids.
What force and size range do you manufacture?
Lift gas springs are made from about 10 N to 2,500 N, with strokes from 20 mm to 1,000 mm and tube/rod sizes of 15/6, 18/8, 22/10, and 28/14 mm. Custom lengths, forces, and end fittings are made to order.
Which end fittings are available?
Metal and plastic ball sockets, eyelets, clevis forks, flat blade ends, threaded studs, and angled or flat mounting brackets. Ball studs and brackets can be supplied with the springs.
Can lift gas springs be customized for OEM production?
Yes. Force, stroke, extended length, tube and rod size, end fittings, damping, finish, colour, and branding can be specified. Samples are made for fit testing before batch production.
What is the lead time for lift gas springs?
Production orders typically ship within 15 working days after sample approval. Changzhou Longxiang Gas Spring has a capacity of more than 3 million gas springs a year and exports to more than 70 countries.
How long do lift gas springs last?
LX gas springs have passed a TÜV fatigue test of 180,000 cycles and are covered by a 3-year warranty. Actual life depends on load, mounting, temperature, and environment.