Hydraulic Dampers and Soft-Close Gas Dampers

Controlled Closing For OEM Motion Systems

Gas spring dampers are used when the main requirement is controlled movement rather than lift force. They help reduce slamming, manage closing speed, absorb impact, and improve the feel of lids, covers, waste bins, RV compartments, industrial panels, and furniture mechanisms.

Damper Selection Inputs

A useful damper RFQ includes the moving part weight, motion direction, stroke, installed length, available bracket space, desired closing speed, operating angle, end fitting type, expected cycle frequency, temperature, and whether the application also needs lift support.

Where Dampers Are Usually Applied

Dampers are commonly reviewed for RV storage compartments, waste bin lids, soft-close covers, toolboxes, machine guards, vehicle storage panels, furniture doors, and access covers where uncontrolled motion could cause noise, impact, or user safety issues.

OEM Review Before Production

For batch production, the damper should be tested inside the real mechanism because closing speed depends on weight, angle, friction, temperature, mounting point position, and available stroke. LX Gas Spring can review samples, drawings, and application photos before quoting.

Damper Or Gas Spring?

Damper or gas spring? A gas spring is charged with nitrogen and pushes: it lifts a lid and holds it open. A hydraulic damper (gas damper) has no lifting force: oil is forced through a small valve or orifice in the piston, and the size of that valve sets how fast the part can move. Choose a damper when the problem is speed, slamming or impact; choose a gas spring when the problem is weight; combine them, or use a gas spring with end damping, when a heavy lid must both lift and close softly.

What A Gas Spring Damper Does

A hydraulic damper controls speed instead of lifting a load. Oil is forced through a small orifice in the piston, so the moving part slows down and closes or opens smoothly instead of slamming. Dampers are used on waste bin lids, RV compartment doors, drop-down doors, furniture flaps, soft-close covers, and machine guards.

OEM Hydraulic Damper Manufacturing

LX Gas Spring manufactures hydraulic dampers for OEM, ODM and private label programs. Length, stroke, damping force, damping direction, end fittings, finish and packaging are made to the customer drawing, production runs under ISO 9001, and all LX products carry a 3-year warranty. Send the moving weight, stroke, direction and target closing time for a damper recommendation.

Standard ZQL Damper Range

The standard ZQL damper series covers extended lengths from about 112 mm to 825 mm, strokes from 15 mm to 370 mm, and damping forces from about 50 N to 445 N, with 15 mm, 18 mm, or 22 mm tubes and 6 mm, 8 mm, or 10 mm rods. Other lengths, damping forces, and end fittings are made to order.

End Fittings, Direction, And Quality

Dampers are supplied with eyelets, slotted forks, plastic ends, or ball sockets. Specify whether damping is needed in compression, extension, or both, and the closing time you want, so the valving can be set for your mechanism. LX gas springs have passed a TÜV fatigue test of 180,000 cycles, and all LX gas springs are covered by a 3-year warranty.

Damper Types In The Range

The range includes hydraulic dampers with metal eyelets, slotted forks, blade ends or plastic end fittings, ball joint dampers for mounts where the angle changes, guide buffer dampers for end-of-travel cushioning, and SS316 stainless steel saltwater-resistant dampers for marine, washdown and outdoor equipment. Lengths, damping force, direction and fittings are made to the drawing.

Damper, Gas Spring, Or Both

A damper slows movement but cannot lift or hold a lid; a gas spring lifts and holds. For heavy lids that must also close gently, the two are combined; see the damper vs gas spring guide for a full comparison.

Hydraulic Dampers and End Fittings

Hydraulic damper with plastic end fitting
Hydraulic damper with plastic end fitting.
Pair of hydraulic dampers with metal eyelet end fittings
Pair of hydraulic dampers with metal eyelet end fittings.
Hydraulic dampers with eyelet and slotted fork end fittings
Hydraulic dampers with eyelet and slotted fork end fittings.
Hydraulic damper with yellow zinc-plated eyelet end fittings
Hydraulic damper with yellow zinc-plated eyelet end fittings.

Choose A Damper By Application

ApplicationWhat the damper doesUsual choice
Soft-close lid or coverSlows the last part of closingDamper working in compression, with ball sockets or eyelets
Drop-down door or flapControls the descent so the door does not fallDamper, or gas spring set for drop-down geometry
Drawer or sliding panelSoft stop at the end of travelShort-stroke damper
Waste bin and storage lidsQuiet, slow closingDamper with plastic end fittings
Machine buffer or end stopAbsorbs impact at the end of travelDamper sized for the moving mass and speed
Heavy lid that must lift and close softlyLift plus soft closeGas spring with end damping, or gas spring plus damper

Frequently Asked Questions

Do you make custom hydraulic dampers for OEM projects?

Yes. Length, stroke, damping force and direction, end fittings, finish and packaging are made to your drawing for OEM, ODM and private label programs, with samples checked in your mechanism before production.

What is a gas spring damper?

A gas spring damper (hydraulic damper) is an oil-filled cylinder that slows the movement of a lid, door, or panel. It controls speed rather than lifting the load, so the part closes or opens smoothly instead of slamming.

What sizes are available for standard dampers?

The standard ZQL series runs from about 112 mm to 825 mm extended length, 15 mm to 370 mm stroke, and about 50 N to 445 N damping force, with 15, 18, or 22 mm tubes. Custom sizes are available.

Can the damping speed be customized?

Yes. Damping force and direction are set by the internal valving. Send the moving weight, motion direction, stroke, and the closing or opening time you want, and the damper can be tuned and checked on samples.

Where are hydraulic dampers used?

Common uses include waste bin lids, RV storage compartments, drop-down doors, furniture flaps, soft-close covers, machine guards, and vehicle storage panels.

Are stainless steel dampers available?

Yes. SS316 stainless steel saltwater-resistant dampers are available for marine, washdown, food and outdoor equipment, with stainless end fittings.